• +64 6 354 3651
  • Email sales@soco.co.nz

DAVIES PUMPS

Since 1931 Davies Pumps have been producing the finest pumping equipment for home, farm and industry right here in New Zealand.  Today we bring together a diverse range of surface pumps, to suit all applications from light domestic house pumps to large agricultural and industrial pump systems, and a complete range of submersible pumps to suit all applications from ponds and water features to storm water and effluent.

Davies Pumps BK201M
Davies Pumps BK201M

The Davies Pumps BK201M twin impeller pump offers high head therefore supplying high pressure around a farm to fill troughs. Pump has a cast iron body and a pressed brass impeller and fitted with a Carbon-ceramic mechanical seal. The pump has a 40mm inlet and a 25mm outlet all coupled to a 1.5kW Aluminium single phase motor.

View Pricelist
Davies Pumps BK301T
Davies Pumps BK301T

The Davies Pumps BK301T twin impeller pump offers high head therefore supplying high pressure around a farm to fill troughs. Pump has a cast iron body and a pressed brass impeller and fitted with a Carbon-ceramic mechanical seal. The pump has a 40mm inlet and a 25mm outlet all coupled to a 2.2kW Aluminium three phase motor.

View Pricelist
Davies Pumps BK551T
Davies Pumps BK551T

The Davies Pumps BK551T twin impeller pump offers high head therefore supplying high pressure around a farm to fill troughs. Pump has a cast iron body and a pressed brass impeller and fitted with a Carbon-ceramic mechanical seal. The pump has a 50mm inlet and a 32mm outlet all coupled to a 4kW Aluminium three phase motor.

View Pricelist
Davies Pumps CN40-1000
Davies Pumps CN40-1000

The Davies Pumps CN40-1000 twin impeller pump offers high head therefore supplying high pressure around a farm to fill troughs. Pump has a cast iron body and a pressed brass impeller and fitted with a Carbon-ceramic mechanical seal. The pump has a 50mm inlet and a 32mm outlet all coupled to a 4kW Aluminium three phase motor.

View Pricelist
Davies Pumps CN32-550
Davies Pumps CN32-550

The Davies Pumps CN32-550 offers a high pressure and volume commonly used as a farm wash down pump or council water supply and for factory main water supply. Pump wet end is manufactured in cast iron and fitted with a standard Carbon-ceramic mechanical seal. The pump has 50mm flanged inlet and a 32mm flanged outlet all coupled to a 4kW Aluminium three phase motor. Pump comes complete with a matching flange set.

View Pricelist
Davies Pumps CKD-050M
Davies Pumps CKD-050M

The Davies Pumps CKD-050M 304 stainless steel open impeller pump offers a high volume and a low head. Ideal for the food industry, plate cooler, liquid transfer, industrial washing and rinsing and clean water circulation.

The pump wet end is manufactured in 304 stainless steel all coupled to 0.37 kW Aluminium single phase electric motor. The pump has 32mm inlet and 25mm outlet and is fitted with a Silicon carbide/Carbon mechanical seal. The pump has a working temperature range of -20C to + 110C.

View Pricelist
Davies Pumps KP200T
Davies Pumps KP200T

The Davies Pumps KP200T is a high volume low head pump for use on milk plate coolers or anywhere were they may require to move a lot of liquid at a low pressure. The pump has a cast iron body with a Techno-polymer impeller and fitted with a Carbon/ceramic mechanical seal. The pump has a 50mm inlet and outlet and coupled to a 1.47kW three phase Aluminium motor.

View Pricelist
Davies Pumps KP120
Davies Pumps KP120

The Davies Pumps KP120 is a high volume low head pump for use on milk plate coolers or anywhere were they may require to move a lot of liquid at a low pressure. The pump has a cast iron body with a Techno-polymer impeller and fitted with a Carbon/ceramic mechanical seal. The pump has a 50mm inlet and outlet and coupled to a 0.9kW single phase or three phase Aluminium motor.

View Pricelist
Davies Pumps ULTRA 5S-120/4
Davies Pumps ULTRA 5S-120/4

The Davies Pumps ULTRA 5S-120/4 pump is ideal for a house with 2-3 bathrooms. The best installation is for the pump to be beside the water supply tank and pumping to the house. The pump has a maximum pressure of 45M (64PSI) dead head and a maximum flow rate of 140 Lt/min at 10M (14PSI).

View Pricelist
Davies Pumps UV30A
Davies Pumps UV30A

The Davies Pumps UV30A is a vortex submersible sump pump used for cow shed wash down sumps or back yard drainage. The pump has a 40mm discharge and can pass a 27mm solid. The pump has a double mechanical seal in an oil chamber and powered by a 0.25kW single phase motor and fitted with a float.

View Pricelist
Davies Pumps UV50A
Davies Pumps UV50A

The Davies Pumps UV50A is a vortex submersible sump pump used for cow shed wash down sumps or back yard drainage. The pump has a 50mm discharge and can pass a 35mm solid. The pump has a double mechanical seal in an oil chamber and powered by a 0.4kW single phase motor and fitted with a float.

View Pricelist
Davies Pumps  UV100A
Davies Pumps UV100A

The Davies Pumps UV100A is a vortex submersible sump pump used for cow shed wash down sumps or back yard drainage. The pump has a 75mm discharge and can pass a 37mm solid. The pump has a double mechanical seal in an oil chamber and powered by a 0.75kW single phase motor and fitted with a float.

View Pricelist
Davies Pumps Jet 102M
Davies Pumps Jet 102M

The Davies Pumps Jet 102M pump is ideal for a house with 1-1.5 bathrooms. The best installation is for the pump to be beside the water supply tank and pumping to the house. Being a jet pump this pump can be used for sucking from a bore or a tank below ground.

View Pricelist
Davies Pumps Jet 302M
Davies Pumps Jet 302M

The Davies Pumps Jet 302M/T pump is ideal for a house with 2-3 bathroom or farm troughs supply. The best installation is for the pump to be beside the water supply tank and pumping to the house or pressure tank for farm supply. Being a jet pump this pump can be used for sucking from a bore or a tank below ground.

View Pricelist
Davies Pumps MVI 10
Davies Pumps MVI 10

The Davies MVI 10-08 is a non-self-priming vertical multistage pump manufactured in 304 stainless steel. The pump has 8 impellers giving a very high pressure and high flow rate, all coupled to a 3kW three phase motor. These pumps are ideal for farm supply where hills are involved and as boiler feed pumps. The pump has 40mm flange connections.

Davies Pumps DRS 8/12
Davies Pumps DRS 8/12

The Davies Pumps DRS 8/12 bore hole pump is manufactured in 304 stainless steel with a 431 S/S shaft. Pump head has a 40mm outlet and fitted with a check valve. Max sand content 50g/M3 Pump requires a 2.2kW signal or three phase motor, see below. Maximum working head 63M @ 40Lt/min, and the maximum flow of 190Lt/min @ 25M. Outside diameter of 98mm.